0
چهارشنبه 21 آذر 1397
سبد خرید ( 0 )
responsive carousel
PLC-RSC- 24DC/21 -2966171
مدل: 2966171
شرح: رله 24V PLCفونیکس کنتاکت
 

Dimensions

Width 6.2 mm
Height 80 mm
Depth 94 mm

Back to top

 

Ambient conditions

Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

Back to top

 

Coil side

Nominal input voltage UN 24 V DC
Typical input current at UN 9 mA
Typical response time 5 ms
Typical release time 8 ms
Protective circuit Reverse polarity protection Polarity protection diode
  Free-wheeling diode Damping diode
Operating voltage display Yellow LED
Power dissipation for nominal condition 0.22 W

Back to top

 

Contact side

Contact type 1 PDT
Type of switch contact Single contact
Contact material AgSnO
Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...)
Minimum switching voltage 5 V (at 100 mA)
Min. switching current 10 mA (at 12 V)
Maximum inrush current 10 A (4 s)
Limiting continuous current 6 A
Interrupting rating (ohmic load) max. 140 W (at 24 V DC)
  20 W (at 48 V DC)
  18 W (at 60 V DC)
  23 W (at 110 V DC)
  40 W (at 220 V DC)
  1500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13)
  0.2 A (at 110 V, DC13)
  0.1 A (at 220 V, DC13)
  3 A (at 24 V, AC15)
  3 A (at 120 V, AC15)
  3 A (at 230 V, AC15)

Back to top

 

Connection data input side

Connection name Coil side
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
  0.2 mm² ... 2.5 mm² ()
  2x 0.5 mm² ... 1.5 mm² ()
Conductor cross section AWG 26 ... 14

Back to top

 

Connection data output side

Connection name Contact side
Connection method Screw connection
Stripping length 8 mm
Screw thread M3
Conductor cross section solid 0.14 mm² ... 2.5 mm²
Conductor cross section flexible 0.14 mm² ... 2.5 mm²
  0.2 mm² ... 2.5 mm² ()
  2x 0.5 mm² ... 1.5 mm² ()
Conductor cross section AWG 26 ... 14

Back to top

 

General

Note Separating plate PLC-ATP must be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or FBST 500....
Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.)
Operating mode 100% operating factor
Degree of protection IP20 (Relay base)
Mechanical service life 2x 107 cycles
Mounting position any
Assembly instructions In rows with zero spacing

Back to top

 

Standards and Regulations

Connection in acc. with standard CUL
Designation Standards/regulations
Standards/regulations IEC 60664
  EN 50178
Degree of pollution 3
Overvoltage category III
Flammability rating according to UL 94 V0

Back to top

 

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
  For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”