0
سه شنبه 27 آذر 1397
سبد خرید ( 0 )
responsive carousel
RIF-0-RPT-24DC/21AU - 2903368
مدل: 2903368
شرح: PLC رله سیم گیر فنری
 

Dimensions

Width 6.2 mm
Height 93 mm
Depth 78 mm

 

Ambient conditions

Ambient temperature (operation) -40 °C ... 60 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

Back to top

 

Coil side

Nominal input voltage UN 24 V DC
Input voltage range in reference to UN see diagram
Typical input current at UN 9 mA
Typical response time 5 ms
Typical release time 8 ms
Coil voltage 24 V DC
Protective circuit Damping diode
Operating voltage display Yellow LED
Power dissipation for nominal condition 0.22 W

Back to top

 

Contact side

Contact type 1 PDT
Type of switch contact Single contact
Contact material AgSnO, hard gold-plated
Maximum switching voltage 30 V AC
  36 V DC
Minimum switching voltage 100 mV (at 10 mA)
Min. switching current 1 mA
Maximum inrush current 50 mA
Limiting continuous current 50 mA
Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947 1 A (24 V (DC13))
  3 A (230 V (AC 15))

Back to top

 

Contact side (with destroyed gold layer)

Contact material AgSnO
Note the following values are applicable if a gold layer is destroyed
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V (at 100 mA)
Limiting continuous current 6 A
Min. switching current 10 mA (at 12 V)
Interrupting rating (ohmic load) max. 140 W (at 24 V DC)
  20 W (at 48 V DC)
  18 W (at 60 V DC)
  23 W (at 110 V DC)
  40 W (at 220 V DC)
  1500 VA (for 250 V AC)
Switching capacity in acc. with DIN VDE 0660/IEC 60947 2 A (at 24 V, DC13)
  0.2 A (at 110 V, DC13)
  0.1 A (at 220 V, DC13)
  3 A (at 24 V, AC15)
  3 A (at 120 V, AC15)
  3 A (at 230 V, AC15)

Back to top

 

Connection data input side

Connection name Input side
Connection method Push-in connection
Stripping length 8 mm
Conductor cross section solid 0.14 mm² ... 1.5 mm²
Conductor cross section flexible 0.14 mm² ... 1.5 mm²
  0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section AWG 24 ... 16

Back to top

 

Connection data output side

Connection name Output side
Connection method Push-in connection
Stripping length 8 mm
Conductor cross section solid 0.14 mm² ... 1.5 mm²
Conductor cross section flexible 0.14 mm² ... 1.5 mm²
  0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)
Conductor cross section AWG 24 ... 16

Back to top

 

General

Test voltage relay winding/relay contact 4 kVrms (50 Hz, 1 min.)
Operating mode 100% operating factor
Degree of protection IP20 (Relay base)
  RT III (Relay)
Mechanical service life approx. 2x 107 cycles
Mounting position any
Assembly instructions In rows with zero spacing

Back to top

 

Standards and Regulations

Standards/regulations DIN EN 50178
Rated insulation voltage 250 V AC
Rated surge voltage 6 kV
Insulation safe isolation
Degree of pollution 2
Overvoltage category III
Flammability rating according to UL 94 V2

Back to top

 

Environmental Product Compliance

REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
  For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”