0
جمعه 02 اسفند 1398
سبد خرید ( 0 )
responsive carousel
مبدل وایزولاتور سیگنال های آنالوگ فونیکس کنتاکت
مدل: MINI MCR-SL-UI-UI-NC
کد کالا: 2864150
 

Dimensions

Width 6.2 mm
Height 93.1 mm
Depth 102.5 mm

Back to top

 

Ambient conditions

Ambient temperature (operation) -20 °C ... 65 °C
Ambient temperature (storage/transport) -40 °C ... 85 °C

Back to top

 

Input data

Number of inputs 1
Configurable/programmable Yes, unconfigured
Voltage input signal 0 V ... 10 V
  0 V ... 5 V
  1 V ... 5 V
  2 V ... 10 V
Current input signal 0 mA ... 20 mA
  4 mA ... 20 mA
max. input voltage 30 V
Max. input current 50 mA
Input resistance of voltage input approx. 100 kΩ
Input resistance current input approx. 50 Ω

Back to top

 

Output data

Number of outputs 1
Configurable/programmable Yes, unconfigured
Voltage output signal 0 V ... 10 V
  0 V ... 5 V
  1 V ... 5 V
  2 V ... 10 V
Current output signal 0 mA ... 20 mA (please indicate if different setting when ordering)
  4 mA ... 20 mA
Max. output voltage approx. 12.5 V
Max. output current 28 mA
Short-circuit current approx. 22 mA
Load/output load voltage output ≥ 10 kΩ
Load/output load current output < 500 Ω (at 20 mA)
Ripple < 20 mVPP (at 500 Ω)
  < 20 mVPP (at 10 kΩ)

Back to top

 

Power supply

Nominal supply voltage 24 V DC
Supply voltage range 19.2 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Max. current consumption < 19 mA (Current output, at 24 V DC incl. load)
  < 9 mA (Voltage output, at 24 V DC incl. load)
Power consumption < 450 mW (Current output)
  < 200 mW (Voltage output)

Back to top

 

Connection data

Connection method Screw connection
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 2.5 mm²
Conductor cross section AWG min. 26
Conductor cross section AWG max. 12
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 2.5 mm²
Stripping length 12 mm
Screw thread M3

Back to top

 

General

No. of channels 1
Maximum transmission error ≤ 0.1 % (of final value)
  < 0.4 % (Without adjustment)
Maximum temperature coefficient < 0.01 %/K
Temperature coefficient, typical < 0.002 %/K
Limit frequency (3 dB) approx. 100 Hz
Step response (10-90%) approx. 3.2 ms
Protective circuit Transient protection
Electrical isolation Basic insulation according to EN 61010
Overvoltage category II
Degree of pollution 2
Rated insulation voltage 50 V AC/DC
Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.)
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Color green
Housing material PBT
Mounting position any
Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715.
Conformance CE-compliant
ATEX  II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada UL 508 Recognized
  Class I, Div. 2, Groups A, B, C, D T5
GL GL EMC 2 D
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2

Back to top

 

EMC data

Designation Electromagnetic RF field
Standards/regulations EN 61000-4-3
Typical deviation from the measuring range final value 5 %
Designation Fast transients (burst)
Standards/regulations EN 61000-4-4
Typical deviation from the measuring range final value 5 %
Designation Conducted interferences
Standards/regulations EN 61000-4-6
Typical deviation from the measuring range final value 5 %

Back to top

 

Standards and Regulations

Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-4
Connection in acc. with standard CUL
Standards/regulations EN 61000-4-2
Designation Electromagnetic RF field
Standards/regulations EN 61000-4-3
  EN 61000-4-4
  EN 61000-4-5
Designation Conducted interferences
Standards/regulations EN 61000-4-6
Electrical isolation Basic insulation according to EN 61010
Conformance CE-compliant
ATEX  II 3 G Ex nA IIC T4 Gc X
UL, USA/Canada UL 508 Recognized
  Class I, Div. 2, Groups A, B, C, D T5
GL GL EMC 2 D
Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2
Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2

Back to top

 

Environmental Product Compliance

China RoHS Environmentally Friendly Use Period = 50
  For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration”