توضیحات
ارستر های پر قدرت شرکت فونیکس کنتاکت با تکنولوژی منحصر به فرد برای حفاظت ثانویه تجهیزات وسیستم ها در برابر ازدیاد ناگهانی ولتاژ و جریان
Class B+C -T1+T2
قدرت قطع 100KA
Class B+C -T1+T2: اين ارستر بيشترين قدرت قطع را در بين ارسترهاي شركت فونيكس كنتاكت دارا مي باشد .در مواردي كه ارسترهاي كلاس B وC در يك شبكه نياز باشند؛ ميتوان از ارستر تركيبي به جاي آنها استفاده نمود كه باعث صرفه جويي در وقت و هزينه مي گردد.
Type 1+2 special combined lightning current and surge arrester – SYS-SET/ 2 – 2880451
Plug-in lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N).
General
IEC test classification I + II
T1 + T2
I
EN type T1 + T2
IEC power supply system TN-S
TT
Mode of protection L-N
L-PE
N-PE
Mounting type DIN rail: 35 mm
Color light grey RAL 7035
traffic grey A RAL 7042
Housing material PA 6.6-FR 20 % GF
PBT-FR
Degree of pollution 2
Flammability rating according to UL 94 V-0
Type DIN rail module, two-section, divisible
Number of positions 4
Arrester can be tested with CHECKMASTER from software version: From SW rev. 3.00
Surge protection fault message optical
Back to top
Protective circuit
Nominal voltage UN 240/415 V AC (TN-S)
240/415 V AC (TT)
Nominal frequency fN 50 Hz (60 Hz)
Maximum continuous voltage UC 350 V AC
Rated load current IL 125 A (< 55 °C)
Residual current IPE ≤ 0.01 mA
Nominal discharge current In (8/20) µs (L-N) 25 kA
Nominal discharge current In (8/20) µs (L-PE) 25 kA
Nominal discharge current In (8/20) µs (N-PE) 100 kA
Impulse discharge current (10/350) µs (L-N), charge 12.5 As
Impulse discharge current (10/350) µs (L-N), specific energy 160 kJ/Ω
Impulse discharge current (10/350) µs (L-N), peak current value Iimp 25 kA
Impulse discharge current (10/350) µs (L-PE), charge 12.5 As
Impulse discharge current (10/350) µs (L-PE), specific energy 160 kJ/Ω
Impulse discharge current (10/350) µs (L-PE), peak current value Iimp 25 kA
Impulse discharge current (10/350) µs (N-PE), charge 50 As
Impulse discharge current (10/350) µs (N-PE), specific energy 2500 kJ/Ω
Impulse discharge current (10/350) µs (N-PE), peak current value Iimp 100 kA
Follow current interrupt rating Ifi (L-N) 25 kA (264 V AC)
3 kA (350 V AC)
Follow current interrupt rating Ifi (N-PE) 100 A (350 V AC)
Short-circuit current rating ISCCR 25 kA (264 V AC)
3 kA (350 V AC)
Voltage protection level Up (L-N) ≤ 1.5 kV
Voltage protection level Up (L-PE) ≤ 2.2 kV
Voltage protection level Up (N-PE) ≤ 1.5 kV
Residual voltage Ures (L-N) ≤ 1.5 kV (at In)
≤ 1.2 kV (at 10 kA)
≤ 1 kV (at 5 kA)
≤ 0.9 kV (at 3 kA)
Residual voltage Ures (L-PE) ≤ 2.2 kV (at In)
≤ 2 kV (at 10 kA)
≤ 1.8 kV (at 5 kA)
≤ 1.6 kV (at 3 kA)
Residual voltage Ures (N-PE) ≤ 1.5 kV (at In)
≤ 1 kV (at 10 kA)
≤ 0.9 kV (at 5 kA)
≤ 0.8 kV (at 3 kA)
TOV behavior at UT (L-N) 415 V AC (5 s / withstand mode)
457 V AC (120 min / safe failure mode)
TOV behavior at UT (N-PE) 1200 V AC (200 ms / withstand mode)
Response time tA (L-N) ≤ 25 ns
Response time tA (N-PE) ≤ 100 ns
Max. backup fuse with V-type through wiring 125 A (gG)
Max. backup fuse with branch wiring 315 A (gG)