توضیحات
Monitoring relay – EMD-SL-PTC – 2866093
Monitoring relay for temperature monitoring of the motor winding (maximum 6 PTC) with error memory for temperature sensors in acc. with DIN 44081, test function with integrated test/reset button, supply voltage can be selected via power module, 2 changeover contacts
Dimensions
Width 22.5 mm
Height 90 mm
Depth 113 mm
Back to top
Ambient conditions
Ambient temperature (operation) -25 °C … 55 °C
-25 °C … 40 °C (corresponds to UL 508)
Ambient temperature (storage/transport) -25 °C … 70 °C
Permissible humidity (operation) 15 % … 85 %
Degree of protection IP40 (Housing)
IP20 (Connection terminal blocks)
Noise immunity EN 61000-6-2
Back to top
Input data
Maximum temperature coefficient < 0.1 %/K
Function Winding temperature monitoring
Basic accuracy ± 10 % (of scale end value)
Repeat accuracy ≤ 2 %
Total cold resistance < 1.5 kΩ
Response value ≥ 3.6 kΩ (Relay drops out)
Release value ≤ 1.8 kΩ (Relay picks up)
Short-circuit detection < 20 Ω
Voltage influence ≤ 1 %
Recovery time 500 ms
Back to top
Contact side
Contact type 2 floating changeover contacts
Maximum switching voltage 250 V AC (in acc. with IEC 60664-1)
Interrupting rating (ohmic load) max. 750 VA (3 A/250 V AC, module aligned, ≤ 5 mm spacing)
1250 VA (5 A/250 V AC, module not aligned, ≥ 5 mm spacing)
Output fuse 5 A (fast-blow)
Back to top
Power supply
Supply voltage range 24 V AC ... 230 V AC (see Power modules)
24 V DC (see Power modules)
Back to top
General
Mechanical service life approx. 2x 107 cycles
Operating mode 100% operating factor
Mounting position any
Assembly instructions on standard DIN rail NS 35 in accordance with EN 60715
Electromagnetic compatibility Conformance with EMC directive
Housing insulation material Polyamide PA, self-extinguishing
Back to top
Connection data
Connection method Screw connection
Stripping length 8 mm
Conductor cross section solid 0.5 mm² ... 2.5 mm²
Conductor cross section flexible 0.25 mm² ... 2.5 mm²
Conductor cross section AWG 20 ... 14
Back to top
Standards and Regulations
Low Voltage Directive Conformance with Low Voltage Directive
Electromagnetic compatibility Conformance with EMC directive
Noise emission EN 61000-6-3
Noise immunity EN 61000-6-2
Standards/regulations EN 50178
Rated insulation voltage 300 V
Rated surge voltage 4 kV
Insulation Basic insulation
Pollution degree 2
Overvoltage category III