توضیحات
Signal conditioner – MINI MCR-2-UI-UI – 2902037
3-way signal conditioner with plug-in connection technology and calibrated measuring range changeover for the electrical isolation of unipolar and bipolar analog signals. Input/output configurable via DIP switch. Screw connection technology, standard configuration.
Dimensions
Width 6.2 mm
Height 109.81 mm
Depth 119.2 mm
Back to top
Ambient conditions
Ambient temperature (operation) -40 °C … 70 °C
Ambient temperature (storage/transport) -40 °C … 85 °C
Maximum altitude ≤ 2000 m
Permissible humidity (operation) 5 % … 95 % (non-condensing)
Degree of protection IP20 (not assessed by UL)
Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations.
Back to top
Input data
Designation Voltage/current input
Number of inputs 1
Configurable/programmable Yes
Voltage input signal 0 V … 5 V (via DIP switch)
1 V … 5 V (via DIP switch)
-5 V … 5 V (via DIP switch)
0 V … 10 V (via DIP switch)
2 V … 10 V (via DIP switch)
-10 V … 10 V (via DIP switch)
0 V … 20 V (via DIP switch)
4 V … 20 V (via DIP switch)
-20 V … 20 V (via DIP switch)
0 V … 24 V (via DIP switch)
4.8 V … 24 V (via DIP switch)
-24 V … 24 V (via DIP switch)
0 V … 30 V (via DIP switch)
6 V … 30 V (via DIP switch)
-30 V … 30 V (via DIP switch)
Current input signal 0 mA … 20 mA (via DIP switch)
4 mA … 20 mA (via DIP switch)
-20 mA … 20 mA (via DIP switch)
max. input voltage 33 V
Max. input current 24 mA
Input resistance of voltage input > 1000 kΩ
Input resistance current input approx. 63 Ω (+0.7 V for test diode)
Back to top
Output data
Output name Voltage output / current output
Number of outputs 1
Configurable/programmable Yes
Voltage output signal 0 V … 5 V (via DIP switch)
1 V … 5 V (via DIP switch)
-5 V … 5 V (via DIP switch)
0 V … 10 V (via DIP switch)
2 V … 10 V (via DIP switch)
-10 V … 10 V (via DIP switch)
Current output signal 0 mA … 20 mA (via DIP switch)
4 mA … 20 mA (via DIP switch)
Max. output current 22 mA
Short-circuit current < 32 mA
Load/output load voltage output ≥ 10 kΩ
Load/output load current output ≤ 600 Ω (at 20 mA)
Ripple < 20 mVPP (at 600 Ω)
< 20 mVPP (at 600 Ω)
Back to top
Power supply
Nominal supply voltage 24 V DC
Supply voltage range 9.6 V DC ... 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Item No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715))
Typical current consumption 25 mA (Current output, at 24 V DC incl. load)
54 mA (Current output, at 12 V DC incl. load)
Power consumption ≤ 800 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load)
