توضیحات
Resistance/potiposition transducer – MINI MCR-2-POT-UI
2902016
Configurable potiposition transducer with plug-in connection technology for connecting potentiometers from 0 Ω … 100 Ω to 0 kΩ … 100 kΩ. Configurable via DIP switch or software. Screw connection technology, standard configuration
| No. of channels | 1 |
| Rated insulation voltage | 300 V (effective) |
| Electrical isolation | Reinforced insulation in accordance with IEC 61010-1 |
| Test voltage, input/output/supply | 3 kV (50 Hz, 1 min.) |
| Protective circuit | Transient protection |
| Step response (0–99%) | < 60 ms |
| Maximum temperature coefficient | 0.01 %/K |
| Temperature coefficient, typical | 0.01 %/K |
| Maximum transmission error | < 0.1 % (R < 240 Ω = < 0,2 %) |
| Supply | |
| Nominal supply voltage | 24 V DC |
| Supply voltage range | 9.6 V DC … 30 V DC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Item No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715)) |
| Typical current consumption | 33 mA (24 V DC) |
| 68 mA (12 V DC) | |
| Power consumption | ≤ 850 mW (at IOUT = 20 mA, 9.6 V DC, 600 Ω load) |
| Potentiometer | |
| Potentiometer resistance range | 100 Ω … 100 kΩ |
| Signal | |
| Number of inputs | 1 |
| Signal: Voltage/current | |
| Output name | Voltage output / current output |
| Number of outputs | 1 |
| Voltage output signal | 1 V … 5 V (via DIP switch) |
| 10 V … 0 V (via DIP switch) | |
| 0 V … 5 V (via DIP switch) | |
| 0 V … 10 V (via DIP switch) | |
| 0 V … 10.5 V (can be set via software) | |
| Max. voltage output signal | approx. 12.3 V |
| Non-load voltage | < 17.5 V |
| Current output signal | 0 mA … 20 mA (via DIP switch) |
| 4 mA … 20 mA (via DIP switch) | |
| 20 mA … 0 mA (via DIP switch) | |
| 20 mA … 4 mA (via DIP switch) | |
| 0 mA … 21 mA (can be set via software) | |
| Max. current output signal | 24.6 mA |
| Short-circuit current | < 31.5 mA |
| Load/output load voltage output | ≥ 10 kΩ |
| Load/output load current output | ≤ 600 Ω (at 20 mA) |
| Ripple | < 20 mVPP |
| < 20 mVPP (at 10 kΩ) | |
| Resolution, outputs (voltage) | 1 mV |
| Resolution, outputs (current) | 2 µA |
| Behavior in the event of a sensor error | configurable |
