توضیحات
Power supply unit – TRIO-PS/1AC/24DC/ 2.5 – 2866268
Primary-switched TRIO POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC/2.5 A
Dimensions
Width 32 mm
Height 130 mm
Depth 115 mm
Installation distance right/left 0 mm / 0 mm
Installation distance top/bottom 50 mm / 50 mm
Back to top
Ambient conditions
Degree of protection IP20
Ambient temperature (operation) -25 °C … 70 °C (> 55° C derating : 2.5%/K)
Ambient temperature (storage/transport) -40 °C … 85 °C
Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing)
Climatic class 3K3 (in acc. with EN 60721)
Degree of pollution 2
Back to top
Input data
Nominal input voltage range 100 V AC … 240 V AC
Input voltage range 85 V AC … 264 V AC (Derating < 90 V AC: 2,5 %/V)
Dielectric strength maximum 300 V AC
AC frequency range 45 Hz ... 65 Hz
Discharge current to PE < 3.5 mA
Current consumption 0.95 A (120 V AC)
0.5 A (230 V AC)
Nominal power consumption 97 VA
Inrush current < 15 A
Mains buffering time > 20 ms (120 V AC)
> 100 ms (230 V AC)
Input fuse 2 A (slow-blow, internal)
Recommended breaker for input protection 6 A … 16 A (Characteristics B, C, D, K)
Power factor (cos phi) 0.72
Type of protection Transient surge protection
Protective circuit/component Varistor
Back to top
Output data
Nominal output voltage 24 V DC ±1 %
Setting range of the output voltage (USet) 22.5 V DC … 29.5 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (IN) 2.5 A (UOUT = 24 V DC)
Derating 55 °C … 70 °C (2.5%/K)
Connection in parallel yes, for redundancy and increased capacity
Connection in series yes
Feedback voltage resistance 35 V DC
Protection against overvoltage at the output (OVP) < 35 V DC
Max. capacitive load unlimited
Active current limitation Approx. 5 A (for short-circuit)
Control deviation < 1 % (change in load, static 10 % ... 90 %)
< 2 % (change in load, dynamic 10 % ... 90 %)
< 0.1 % (change in input voltage ±10 %)
Residual ripple < 30 mVPP
Output power 60 W
Typical response time < 1 s
Peak switching voltages nominal load < 20 mVPP
Maximum power dissipation in no-load condition 0.8 W
Power loss nominal load max. 10 W
Back to top
General
Net weight 0.5 kg
Operating voltage display Green LED
Efficiency 86 % (for 230 V AC and nominal values)
MTBF (IEC 61709, SN 29500) > 2054000 h
Insulation voltage input/output 4 kV AC (type test)
2 kV AC (routine test)
Insulation voltage input / PE 2 kV AC (type test)
2 kV AC (routine test)
Insulation voltage output / PE 500 V DC (type test)
Degree of protection IP20
Protection class I (with PE connection)
Mounting position horizontal DIN rail NS 35, EN 60715
Assembly instructions alignable: horizontally 0 mm, vertically 50 mm
