توضیحات
Hybrid motor starter – ELR H5-IES-SC- 24DC/500AC-2
2900414
Hybrid motor starter for reversing 3~ AC motors up to 500 V AC and 2.4 A output current, with 24 V DC control voltage, adjustable overload shutdown and emergency stop function to SIL 3 / PL e and screw connection
| Product type |
Hybrid motor starter |
| Operating mode |
100% operating factor |
| Number of phases |
3 |
| Motor starter type |
Reversing starter |
| Maximum power dissipation for nominal condition |
2.2 W |
| Switching frequency |
≤ 2 Hz (Load-dependent) |
| Maximum power dissipation |
3.3 W |
| Minimum power dissipation |
1.1 W |
| Coordination type |
1 |
| Supply |
| Rated control circuit supply voltage US |
24 V DC |
| Control supply voltage range |
19.2 V DC … 30 V DC |
| Rated control supply current IS |
40 mA |
| Protective circuit |
Surge protection |
| Reverse polarity protection |
| Insulation characteristics |
| Rated insulation voltage |
500 V |
| Rated surge voltage |
6 kV |
| Overvoltage category |
III |
| Degree of pollution |
2 |
| Insulation characteristics between the control input and control supply voltage, and auxiliary circuit to the main circuit |
Safe isolation (IEC 60947-1/EN 50178) at operating voltage ≤ 300 V AC |
| Basic isolation (IEC 60947-1) at operating voltage 300 … 500 V AC |
| Safe isolation (EN 50178) at operating voltage 300 … 500 V AC |
| Isolation characteristics between the control input and control supply voltage to auxiliary circuit |
Safe isolation (IEC 60947-1) in the auxiliary circuit ≤ 300 V AC |
| Safe isolation (EN 50178) in the auxiliary circuit ≤ 300 V AC |
| Control |
| Input name |
Control input right/left |
| Rated actuating voltage UC |
24 V DC |
| Triggering voltage range |
19.2 V DC … 30 V DC |
| Rated actuating current IC |
5 mA (Input type 1) |
| Switching threshold |
9.6 V (“0” signal) |
| 19.2 V (“1” signal) |
| Switching level |
< 5 V DC (For EMERGENCY STOP) |
| Typical turn-off time |
< 30 ms |
| Protective circuit |
Reverse polarity protection |
| AC output |
| Rated operating voltage Ue |
500 V AC |
| Operating voltage range |
42 V AC … 550 V AC |
| Rated operating current Ie |
2.4 A (AC-51) |
| 2.4 A (AC-53a) |
| Mains frequency |
50/60 Hz |
| Load current range |
180 mA … 2.4 A (see to derating) |
| Trigger characteristic in acc. with IEC 60947-4-2 |
Class 10A |
| Cooling time |
20 min. (for auto reset) |
| Leakage current |
0 mA |
| Protective circuit |
Surge protection |
| Acknowledge output |
| Note |
Confirmation: floating change-over contact, signal contact |
| Contact type |
1 changeover contact |
| Switching capacity according to IEC 60947-5-1 |
3 A (230 V, AC15) |
| 2 A (24 V, DC13) |
